All Parts & Boards

Original BCM2835 ARM11 single-board computer in 40-pin Model B+ and classic 26-pin Model B Rev 2 layouts

Quad-core 900 MHz ARM Cortex-A7 single-board computer with 1GB LPDDR2 RAM and 40-pin HAT GPIO header

64-bit 1.4 GHz quad-core Cortex-A53 SBC with dual-band 802.11ac Wi-Fi, Bluetooth 4.2, and 40-pin HAT GPIO in Model B+ and compact Model A+

High-performance BCM2711 Cortex-A72 SBC with up to 8GB LPDDR4, USB 3.0, true Gigabit Ethernet, dual 4K Micro-HDMI, and expanded 6x UART / 6x I2C / 5x SPI GPIO mux

Flagship 2.4 GHz BCM2712 Cortex-A76 SBC with Raspberry Pi RP1 southbridge, PCIe FPC, dual 4-lane MIPI, and 4-SM PIO on the 40-pin J8 HAT+ header

Official Raspberry Pi microcontroller board powered by the RP2040 chip with 2MB QSPI flash and buck-boost SMPS

Official RP2350A microcontroller board with dual Cortex-M33 / Hazard3 RISC-V cores, 520 KB SRAM, and 4 MB QSPI flash

Official RP2350A wireless board with Infineon CYW43439 2.4 GHz Wi-Fi 4, Bluetooth 5.2, 520 KB SRAM, and 4 MB QSPI flash

Official RP2040 microcontroller board with Infineon CYW43439 2.4 GHz Wi-Fi 4, Bluetooth 5.2, and 2 MB QSPI flash

Thumb-sized Wi-Fi 6, BLE 5.3, and Matter/Thread/Zigbee development board with USB-C, LiPo charger, and dual antenna switch

Ultra-compact 0.8 mm pitch 53-pad LGA Wi-Fi 4 and BLE 5.0 module with 15 GPIOs

Compact 2-sided 18-pad castellated Wi-Fi 4 and BLE 5.0 SMD module with 15 GPIOs and PCB or U.FL antenna

Ultra-compact 0.8 mm pitch LGA Wi-Fi 6, BLE 5.3, and Thread/Zigbee module with 22 GPIOs

General-purpose Wi-Fi 6, BLE 5.3, and Thread/Zigbee SMD module with 23 GPIOs and PCB or U.FL antenna

Ultra-compact 0.8 mm pitch 53-pad LGA BLE 5.3 and Thread/Zigbee/Matter module with 19 GPIOs (no Wi-Fi)

3-sided 28+1 pad castellated BLE 5.3 and Thread/Zigbee/Matter SMD module with 19 GPIOs (no Wi-Fi)

Compact 0.8 mm LGA classic ESP32 module (ESP32-U4WDH 4 MB SiP) with 28 usable GPIOs including IO9/IO10 & I37/I38

Compact 65-pad 0.85 mm LGA ESP32-S2 Wi-Fi 4 + USB OTG module with 37 GPIOs (pin-compatible with MINI-1)

Modern 41-pad castellated ESP32-S2 Wi-Fi 4 + USB OTG SMD module with 36 GPIOs and 4/8/16 MB flash or 2 MB PSRAM

Compact 65-pad 0.85 mm LGA dual-core ESP32-S3 Wi-Fi 4 + BLE 5.0 module with up to 39 bidirectional GPIOs

Flagship dual-core ESP32-S3 Wi-Fi 4 + BLE 5.0 + AI SMD module with up to 36 GPIOs and Quad/Octal PSRAM

Industry-standard dual-core ESP32 Wi-Fi 4 + Classic BT / BLE SMD module with 26 usable GPIOs

Classic ESP32 module with 8 MB 3.3V SPI PSRAM, 4/8/16 MB flash, and 24 usable GPIOs

Ultra-compact 0.8 mm pitch 53-pad LGA ESP32-C2 (ESP8684) Wi-Fi 4 and BLE 5 module with 14 GPIOs

Low-cost ESP32-C2 (ESP8684) 2-sided 18-pad castellated Wi-Fi 4 and BLE 5 module with 14 GPIOs

200-pin DDR2 SODIMM industrial system-on-module with Broadcom BCM2835, 512MB RAM, and 4GB onboard eMMC

200-pin DDR2 SODIMM 64-bit industrial compute module with BCM2837B0 heatspreader, 1GB RAM, and 8/16/32GB eMMC or Lite SDX bus

Compact 55x40 mm BCM2711 system-on-module with dual 100-pin high-density B2B connectors exposing PCIe Gen 2, Gigabit Ethernet PHY, dual HDMI 2.0, MIPI CSI/DSI, and 28x GPIO

Compact 55×40 mm BCM2712 + RP1 system-on-module with dual 100-pin B2B connectors exposing 2× USB 3.0, PCIe x1, GbE PHY, dual 4K60 HDMI, 2× 4-lane MIPI, and 28× GPIO

Original dual-core 240 MHz Xtensa LX6 Wi-Fi 4 + Classic BT / BLE 4.2 SoC in QFN-48

Ultra-compact 4×4 mm QFN-24 32-bit RISC-V Wi-Fi 4 and Bluetooth 5 (LE) SoC with stacked flash

Cost-effective 32-bit RISC-V 2.4 GHz Wi-Fi 4 and Bluetooth 5 (LE) SoC in a 5×5 mm QFN-32 package

32-bit RISC-V wireless SoC with Wi-Fi 6, Bluetooth 5.3 (LE), and 802.15.4 (Zigbee / Thread) in QFN-40 and QFN-32 packages

Ultra-low-power 32-bit RISC-V Bluetooth 5.3 (LE) and IEEE 802.15.4 (Thread / Zigbee / Matter) SoC in 4×4 mm QFN-32

Single-core 240 MHz Xtensa LX7 Wi-Fi 4 SoC with native USB OTG, 43 GPIOs, and 2× 8-bit DACs in QFN-56

Dual-core 240 MHz Xtensa LX7 Wi-Fi 4 + BLE 5.0 + AI vector SoC with 45 GPIOs and native USB in QFN-56

Dual-core ARM Cortex-M0+ microcontroller IC with 264KB SRAM and flexible programmable I/O in QFN-56 package

Dual-core 150 MHz Cortex-M33 / Hazard3 RISC-V MCU with 520 KB SRAM, 3× PIO, HSTX, and QFN-60 / QFN-80 packages